BOLIVAR SPEEDWAY

RELEASE AND WAIVER OF LIABILITY,

ASSUMPTION OF RISK AND INDEMNITY AGREEMENT

Pure Stocks Rules for 2008

Participant wishes to participate at Bolivar Speedway, Bolivar, MO.  IN CONSIDERATION of being permitted to compete or participate in any EVENT and/or being permitted to enter RESTRICTED AREAS (defined as any area requiring special authorization, credentials or permission to enter or any area to which admission by the general public is restricted or prohibited), PARTICIPANT, on behalf of himself or herself and his or her personal representatives, heirs, and next of kin, agrees as follows:

• Inspection of Restricted Areas: PARTICIPANT acknowledges, agrees and represents that he or she will immediately upon entering the RESTRICTED AREAS, and continuously thereafter, inspect the RESTRICTED AREAS, and further agrees and warrants that, if at any time, he or she is in or about RESTRICTED AREAS and feels anything to be unsafe, he or she will immediately advise the officials of such and if necessary will leave the RESTRICTED AREAS and/or refuse to participate further in the EVENT.
• Release From Liability: PARTICIPANT releases, waives, discharges and covenants not to sue the promoters, other participants, racing associations, sanctioning organizations or any subdivision thereof, track operators, track owners, officials, car owners, drivers, pit crews, rescue personnel, any persons in the RESTRICTED AREA, promoters, sponsors, advertisers, owners of the premises used to conduct the EVENT, premises and event inspectors, surveyors, underwriters, consultants and others who give recommendations, directions or instructions or engage in risk evaluation or loss control activities regarding the premises or EVENT and each of them, their directors, officers, agents and employees (herein collectively “RELEASEES”) from all liability to PARTICIPANT and/or his personal representatives, assigns or heirs, for bodily injury, death, or property damage that PARTICIPANT may suffer in this EVENT, whether caused by the negligence of RELEASEES or otherwise.
• Agreement to Indemnify and Hold Harmless: PARTICIPANT agrees to indemnify, save and hold harmless RELEASEES from any loss, liability, damage, or cost, including attorney fees, they may incur arising out of or related to his or her participation in the EVENT, whether caused by the negligence of RELEASEES or otherwise.
• Assumption of Risk: PARTICIPANT acknowledges that the activities of the EVENT are very dangerous and involve a substantial risk of serious injury, death and/or property damage and that injuries received may be compounded or increased by negligent rescue operations or procedures of the RELEASEES. PARTICIPANT acknowledges and voluntarily assumes full responsibility for any risk of bodily injury, death, or property damage that may arise out of or is related to the EVENT, whether caused by the negligence of RELEASEES or otherwise.
• Scope of Release: PARTICIPANT agrees that this Release and Waiver of Liability extends to all acts of negligence by RELEASEES, including negligent rescue operations, and is intended to be as broad and inclusive as is permitted by the laws of the State of Missouri. PARTICIPANT agrees that if any portion of the Release and Waiver of Liability is held invalid, the balance shall, notwithstanding, continue in full legal force and effect.
• Venue: This Release and Waiver of Liability shall be construed in accordance with the laws of the State of Missouri. Polk County Missouri shall be the sole and exclusive venue for all disputes arising out of or related to this Release and Waiver of Liability or Participant’s participation in the EVENT.

BODIES  - Minimum wheelbase 108 inches, except 1983 and newer Thunderbirds and Chrysler products  may be 105 inch wheelbase.  Any year American made production car.  All cars to remain stock.  Full frame cars may remove inner front fender wells.  Unibodies may not.  Bumpers must be stock with no added braces outside the frame horns.  Radiator may have protection bar.  Steering column may be stock or fabricated with removable steering wheel.  Car may be stripped and all holes patched.  Rear fire wall between driver and fuel tank.  Mirrors allowed.  Must have lexan windshield or bars and safety screen in front of driver. .  Hoods, fenders and bumpers are required.  Engine Hoop allowed - radiator and fenders may be attached. Minimum of 5 (five) inches frame height.

MOTORS – Must be of same manufacture as car, in stock location, and with stock mounts.  Safety chains may be added.  No aftermarket heads, intakes, or exhaust.  Heads must have GM, Ford, or Chrysler ID.  May have dual exhaust.  Pipes must direct exhaust away from driver.  Engine must maintain 14” of vacuum at idle. Centerline of crankshaft must be a minimum of 12 inches above the ground.

ROLL BARS – Must have at least four upright bars.  Three left side door bars and two right side door bars.  Cross brace behind driver.  Angle brace behind driver and middle bar in top, left leg brace recommended.  Cages must be round roll bar tubing, not less than one and one half (1½”) inches across and ninety five thousandths (.095) of one inch thickness.

CARBURETOR – 2 bbl only Maximum 500 cfm.  No modifications allowed.   Must have choke horn intact.  May remove choke plate only.  Carburetor may be claimed for $250.00 by the track or any driver finishing on the same lap as the winner.  Claimer must state intention to claim to track officials within 5 minutes of end of race.  Failure to sell carburetor will result in loss of  points and money for that night.

TRANSMISSION –Automatic only, with full size working converter.

SHOCKS AND SPRINGS – Stock in stock location

TIRES – Street D.O.T. tires.  No all terrain tires.  Passenger tires only, max tread seven (7) inches in width. (½" tolerance)

REAR ENDS – Stock for car.  Open rear ends only.  No welded gears or spools.  No limited slip rear ends.

GAS TANK – Must be made of heavy duty construction.  Small fuel cell recommended.  Must be strapped in both directions.  16 gallon maximum.

WEIGHT – No added weight allowed.

WHEEL BOLTS AND NUTS – At least ½” bolts and 1 inch lug nuts recommended.

IGNITION – Must be stock

DRIVE LINE – Painted white with front safety hoop.

WHEELS – Steel wheels, seven inch maximum width.   Steel wheels mandatory if available.

BRAKES – Must lock up all four wheels.  Master cylinder and booster may be replaced with any single master cylinder, aftermarket or OEM.  Pedal must remain in stock location.  No brake bias or proportional valves allowed.  No shut off valves.

FIRE EXTINGUISHER – Required, must be full with gauge and within driver’s reach.

UNIFORM – Must wear full racing suit.

HELMET – Snell rating of at least ninety.